Universal wire brush (simple) for brush cutters and trimmers, 200mm
The brush disc is made of high quality steel, resistant to centrifugal force loads and very high speeds up to 10,000 / min.
Straight, corrugated wire, due to its soft structure, is more suitable for scraping uneven surfaces and penetrating corners, compared to twisted, It can be used directly for equipment such as brush cutters as well as large electric corners.
It can operate normally when it hits a rock and a hard block. The service life is 10 times longer than other traditional mowers.
The disc, due to its dimensions, is suitable for most brush cutter models.
Main purpose: weed removal from paving stones, granite blocks, sidewalks, concrete slabs, stones. Also cleaning of all metal surfaces.
Outer diameter - 200 mm
Inner diameter - 25.4 mm / 1 inch
Material - carbon steel wire
The brush type is simple
Maximum RPM - 10,000 RPM
Compatible with the following brushcutters:
STIHL - FS44, FS55, FS56, FS 75, FS 80, FS85, FS87, FS90, FS100, FS120, FS130, FS200, FS250, FR 450 - for the listed Stihla models (buy our a.01uctions0x1) and after fitting the reduction ring from 25, 4 mm to 20.0 mm holes, it is suitable for the above models FS160, FS180, FS220, FS220K, FS280, FS280K, FS290, FS300, FS310, FS350, FS40, FS40, FS40, FS40. Stihl should be a nut M12x1.5
HUSQVARNA - 128R, 125R, 135R, 153R, 240R, 252RX, 322R, 323R, 323RJ, 324RX, 325LX, 325R, 325RX, 325RDX, 325RJ, 325RJX, 326RX, 326RJ, 326LS, 327L5, 333R 343R, 343FR, 345F, 345R, 525LS, 525LST, 535LS, 535RXT, 553RS, 535RX, 543RS, 545R, 545RX, 555RXT, and 22002
Demons RQ415, RQ430, RQ508, RQ508 PRO, RQ580, RQ580T, RQ680
NAC - CG33N / CG260 / CG260B / CG330 / CG330B / CG360N / BCG430 / BCG260 / NCG330 / CG430N / CG430B / WLBC260B2ZXU / WLBC260B2ZXU / BBC260B2ZX / BBC2C2 410 -1025 -V / BP427-17B-V / BP427CA-T / BP427-16MU-T / BP427-17KA-T / BP52LMT / BP517-20-TS / BP517-20B-V / BP520 / BP520-P520 -30KA - T / BP54 / BP540-30B-V / BP540-32B-V / BC580V-2 / BP620-36-T / BP620-38KA-T / MEX540-K30 / MEX620-K38A / Ru 425
GKS 28 / GKS 300 / TMK52 / TMK521 / VKS 517 manual
Alko BC301, BASS, Castorama SPS02-43BC, Dolmar MS25 / 30/340, Echo 2305/250/330/350/4000/5000, Falon-Tech, garden, garden, comfortable, harder PNBC 260 - 1T / 2415 Honda UMK425 / 431/435, Kawasaki KBH27 / 34/43/48, Kraft & Delle, Makita DBC250 / 290/300/340, March-Power CG430, Mastiff MA850, Mitshubishi, NAX BC 800B, 3 Park0 / Texas 800B, 3 Park0 / Texas 800B / CG330 / CG430B, Verto, Victus BC26 / BC32 / BC36 / BC43 / BC301, these models have 25.4 mm (1 inch) gear flanges and nut M10x1.25
If a 20mm reduction ring is required, it can be purchased separately (ask).
If your model is not listed and you do not know how to check if the product is suitable, follow the instructions below:
Lock the drive and unscrew the trimmer head.
There should be a washer under the head, more or less like in the photo. For example, in Stihl or Husqvarna units, the washer under the head has a much larger diameter.
Measure the washer flange.
Measure the thread diameter and thread pitch.
These steps will let you know which hole (25.4 mm or 20 mm) you need to mount the brush / mower on and which nut to use to tighten the kit.